a na treće ovo (i ranije u Suse Linuxu je karticu prijavljivao kao EMU10K1_Audigy što ne bi trebalo da je tačno):
Code:
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf07f0000 - 0xff7fe000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)
[ 0.000000] .init : 0xc07b2000 - 0xc0833000 ( 516 kB)
[ 0.000000] .data : 0xc0582222 - 0xc07b19c8 (2237 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0582222 (4616 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] NR_IRQS:512
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1466.835 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2933.67 BogoMIPS (lpj=1466835)
[ 0.000999] Security Framework initialized
[ 0.000999] AppArmor: AppArmor initialized
[ 0.000999] Mount-cache hash table entries: 512
[ 0.000999] Initializing cgroup subsys ns
[ 0.000999] Initializing cgroup subsys cpuacct
[ 0.000999] Initializing cgroup subsys memory
[ 0.000999] Initializing cgroup subsys freezer
[ 0.000999] Initializing cgroup subsys net_cls
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.000999] mce: CPU supports 4 MCE banks
[ 0.000999] Performance Counters: AMD PMU driver.
[ 0.000999] ------------[ cut here ]------------
[ 0.000999] WARNING: at /build/buildd/linux-rt-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40()
[ 0.000999] Hardware name:
[ 0.000999] Modules linked in:
[ 0.000999] Pid: 0, comm: swapper Not tainted 2.6.31-9-rt #152-Ubuntu
[ 0.000999] Call Trace:
[ 0.000999] [<c0146b2d>] warn_slowpath_common+0x6d/0xa0
[ 0.000999] [<c011e443>] ? native_apic_write_dummy+0x33/0x40
[ 0.000999] [<c011e443>] ? native_apic_write_dummy+0x33/0x40
[ 0.000999] [<c0146b75>] warn_slowpath_null+0x15/0x20
[ 0.000999] [<c011e443>] native_apic_write_dummy+0x33/0x40
[ 0.000999] [<c010e9ec>] perf_counters_lapic_init+0x2c/0x30
[ 0.000999] [<c07b9d58>] init_hw_perf_counters+0x159/0x21c
[ 0.000999] [<c07b999f>] identify_boot_cpu+0x21/0x23
[ 0.000999] [<c07b9b21>] check_bugs+0xb/0xe9
[ 0.000999] [<c07b28f2>] start_kernel+0x2e7/0x311
[ 0.000999] [<c07b242a>] ? unknown_bootoption+0x0/0x1ab
[ 0.000999] [<c07b207c>] i386_start_kernel+0x7c/0x83
[ 0.000999] ---[ end trace a7919e7f17c0a725 ]---
[ 0.000999] ... version: 0
[ 0.000999] ... bit width: 48
[ 0.000999] ... generic counters: 4
[ 0.000999] ... value mask: 0000ffffffffffff
[ 0.000999] ... max period: 00007fffffffffff
[ 0.000999] ... fixed-purpose counters: 0
[ 0.000999] ... counter mask: 000000000000000f
[ 0.000999] Checking 'hlt' instruction... OK.
[ 0.004763] SMP alternatives: switching to UP code
[ 0.010024] Freeing SMP alternatives: 16k freed
[ 0.010071] ACPI: Core revision 20090521
[ 0.019054] ACPI: setting ELCR to 0200 (from 1a20)
[ 0.021168] weird, boot CPU (#0) not listed by the BIOS.
[ 0.021175] SMP motherboard not detected.
[ 0.021179] Local APIC not detected. Using dummy APIC emulation.
[ 0.021182] SMP disabled
[ 0.021821] Brought up 1 CPUs
[ 0.021826] Total of 1 processors activated (2933.67 BogoMIPS).
[ 0.021848] CPU0 attaching NULL sched-domain.
[ 0.022697] Booting paravirtualized kernel on bare hardware
[ 0.023078] regulator: core version 0.5
[ 0.023188] Time: 16:43:07 Date: 11/21/09
[ 0.023302] NET: Registered protocol family 16
[ 0.024394] EISA bus registered
[ 0.024427] ACPI: bus type pci registered
[ 0.025805] PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=1
[ 0.025810] PCI: Using configuration type 1 for base access
[ 0.036080] bio: create slab <bio-0> at 0
[ 0.036910] ACPI: EC: Look up EC in DSDT
[ 0.043409] ACPI: Interpreter enabled
[ 0.043421] ACPI: (supports S0 S1 S4 S5)
[ 0.043466] ACPI: Using PIC for interrupt routing
[ 0.051544] ACPI: No dock devices found.
[ 0.051754] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.051912] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.052048] pci 0000:00:01.0: supports D1
[ 0.052097] pci 0000:00:09.0: reg 10 io port: [0xc000-0xc01f]
[ 0.052140] pci 0000:00:09.0: supports D1 D2
[ 0.052168] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe7000000-0xe700ffff]
[ 0.052177] pci 0000:00:0a.0: reg 14 io port: [0xc400-0xc41f]
[ 0.052239] pci 0000:00:0b.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.052248] pci 0000:00:0b.0: reg 14 32bit mmio: [0xe7010000-0xe70100ff]
[ 0.052272] pci 0000:00:0b.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.052292] pci 0000:00:0b.0: supports D1 D2
[ 0.052296] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold
[ 0.052302] pci 0000:00:0b.0: PME# disabled
[ 0.052354] pci 0000:00:0c.0: reg 20 io port: [0xcc00-0xcc1f]
[ 0.052381] pci 0000:00:0c.0: supports D1 D2
[ 0.052384] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.052390] pci 0000:00:0c.0: PME# disabled
[ 0.052443] pci 0000:00:0c.1: reg 20 io port: [0xd000-0xd01f]
[ 0.052471] pci 0000:00:0c.1: supports D1 D2
[ 0.052474] pci 0000:00:0c.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.052479] pci 0000:00:0c.1: PME# disabled
[ 0.052516] pci 0000:00:0c.2: reg 10 32bit mmio: [0xe7011000-0xe70110ff]
[ 0.052559] pci 0000:00:0c.2: supports D1 D2
[ 0.052562] pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.052568] pci 0000:00:0c.2: PME# disabled
[ 0.052717] pci 0000:00:11.1: reg 20 io port: [0xd400-0xd40f]
[ 0.052798] pci 0000:00:11.2: reg 20 io port: [0xd800-0xd81f]
[ 0.052873] pci 0000:00:11.3: reg 20 io port: [0xdc00-0xdc1f]
[ 0.052950] pci 0000:00:11.4: reg 20 io port: [0xe000-0xe01f]
[ 0.053064] pci 0000:01:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff]
[ 0.053072] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.053092] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.053148] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff]
[ 0.053154] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.053164] pci_bus 0000:00: on NUMA node 0
[ 0.053175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.080207] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.080455] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.080702] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.080945] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 0.081883] SCSI subsystem initialized
[ 0.081982] libata version 3.00 loaded.
[ 0.082475] usbcore: registered new interface driver usbfs
[ 0.082572] usbcore: registered new interface driver hub
[ 0.082688] usbcore: registered new device driver usb
[ 0.083605] ACPI: WMI: Mapper loaded
[ 0.083610] PCI: Using ACPI for IRQ routing
[ 0.095076] Bluetooth: Core ver 2.15
[ 0.095217] NET: Registered protocol family 31
[ 0.095221] Bluetooth: HCI device and connection manager initialized
[ 0.095227] Bluetooth: HCI socket layer initialized
[ 0.095231] NetLabel: Initializing
[ 0.095234] NetLabel: domain hash size = 128
[ 0.095236] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.095266] NetLabel: unlabeled traffic allowed by default
[ 0.107085] pnp: PnP ACPI init
[ 0.107136] ACPI: bus type pnp registered
[ 0.113506] pnp: PnP ACPI: found 14 devices
[ 0.113512] ACPI: ACPI bus type pnp unregistered
[ 0.113519] PnPBIOS: Disabled by ACPI PNP
[ 0.113544] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 0.113549] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.113555] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.113560] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.113565] system 00:00: iomem range 0x2fff0000-0x2fffffff could not be reserved
[ 0.113571] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.113576] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.113581] system 00:00: iomem range 0x100000-0x2ffeffff could not be reserved
[ 0.113586] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.113591] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.113610] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.113615] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.113620] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.149186] AppArmor: AppArmor Filesystem Enabled
[ 0.149248] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.149252] pci 0000:00:01.0: IO window: disabled
[ 0.149261] pci 0000:00:01.0: MEM window: 0xe4000000-0xe5ffffff
[ 0.149267] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff
[ 0.149287] pci 0000:00:01.0: setting latency timer to 64
[ 0.149296] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.149300] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.149306] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe5ffffff]
[ 0.149310] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.149427] NET: Registered protocol family 2
[ 0.149603] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.150398] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.153076] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.158200] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.158207] TCP reno registered
[ 0.158493] NET: Registered protocol family 1
[ 0.158640] Trying to unpack rootfs image as initramfs...
[ 0.513153] Freeing initrd memory: 7591k freed
[ 0.533784] cpufreq-nforce2: No nForce2 chipset.
[ 0.533987] Scanning for low memory corruption every 60 seconds
[ 0.534599] audit: initializing netlink socket (disabled)
[ 0.534636] type=2000 audit(1258821787.532:1): initialized
[ 0.540365] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.540518] VFS: Disk quotas dquot_6.5.2
[ 0.540570] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.541168] fuse init (API version 7.12)
[ 0.541293] msgmni has been set to 1487
[ 0.541621] alg: No test for stdrng (krng)
[ 0.541645] io scheduler noop registered
[ 0.541648] io scheduler anticipatory registered
[ 0.541652] io scheduler deadline registered
[ 0.541674] io scheduler cfq registered (default)
[ 0.541697] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.541821] pci 0000:01:00.0: Boot video device
[ 0.542225] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.542442] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.543055] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.543063] ACPI: Power Button [PWRF]
[ 0.543211] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.543217] ACPI: Power Button [PWRB]
[ 0.543359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.543369] ACPI: Sleep Button [SLPB]
[ 0.543592] fan PNP0C0B:00: registered as cooling_device0
[ 0.543602] ACPI: Fan [FAN] (on)
[ 0.544108] Marking TSC unstable due to TSC halts in idle
[ 0.544208] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.544303] processor LNXCPU:00: registered as cooling_device1
[ 0.544310] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 0.547559] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.547574] ACPI: Thermal Zone [THRM] (40 C)
[ 0.547980] isapnp: Scanning for PnP cards...
[ 0.904585] isapnp: No Plug & Play device found
[ 0.911325] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.911550] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.911720] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.912473] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.912741] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.917100] brd: module loaded
[ 0.918910] loop: module loaded
[ 0.919392] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.923320] pata_via 0000:00:11.1: version 0.3.4
[ 0.924230] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.924236] PCI: setting IRQ 11 as level-triggered
[ 0.924245] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.924254] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11
[ 0.924649] scsi0 : pata_via
[ 0.925100] scsi1 : pata_via
[ 0.929769] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd400 irq 14
[ 0.929776] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd408 irq 15
[ 0.933680] Fixed MDIO Bus: probed
[ 0.933985] PPP generic driver version 2.4.2
[ 0.934508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.935216] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 0.935222] PCI: setting IRQ 5 as level-triggered
[ 0.935230] ehci_hcd 0000:00:0c.2: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.935279] ehci_hcd 0000:00:0c.2: EHCI Host Controller
[ 0.935515] ehci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
[ 0.935645] ehci_hcd 0000:00:0c.2: irq 5, io mem 0xe7011000
[ 0.941037] ehci_hcd 0000:00:0c.2: USB 2.0 started, EHCI 1.00
[ 0.941344] usb usb1: configuration #1 chosen from 1 choice
[ 0.941460] hub 1-0:1.0: USB hub found
[ 0.941484] hub 1-0:1.0: 4 ports detected
[ 0.941663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.941777] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.941877] uhci_hcd 0000:00:0c.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.941895] uhci_hcd 0000:00:0c.0: UHCI Host Controller
[ 0.942114] uhci_hcd 0000:00:0c.0: new USB bus registered, assigned bus number 2
[ 0.942198] uhci_hcd 0000:00:0c.0: irq 11, io base 0x0000cc00
[ 0.942470] usb usb2: configuration #1 chosen from 1 choice
[ 0.942583] hub 2-0:1.0: USB hub found
[ 0.942604] hub 2-0:1.0: 2 ports detected
[ 0.943392] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.943400] uhci_hcd 0000:00:0c.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.943415] uhci_hcd 0000:00:0c.1: UHCI Host Controller
[ 0.943596] uhci_hcd 0000:00:0c.1: new USB bus registered, assigned bus number 3
[ 0.943668] uhci_hcd 0000:00:0c.1: irq 11, io base 0x0000d000
[ 0.943913] usb usb3: configuration #1 chosen from 1 choice
[ 0.944372] hub 3-0:1.0: USB hub found
[ 0.944397] hub 3-0:1.0: 2 ports detected
[ 0.945245] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[ 0.945251] PCI: setting IRQ 12 as level-triggered
[ 0.945259] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 0.945278] uhci_hcd 0000:00:11.2: UHCI Host Controller
[ 0.945542] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
[ 0.945625] uhci_hcd 0000:00:11.2: irq 12, io base 0x0000d800
[ 0.945877] usb usb4: configuration #1 chosen from 1 choice
[ 0.945992] hub 4-0:1.0: USB hub found
[ 0.946069] hub 4-0:1.0: 2 ports detected
[ 0.946172] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 0.946187] uhci_hcd 0000:00:11.3: UHCI Host Controller
[ 0.946334] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
[ 0.946398] uhci_hcd 0000:00:11.3: irq 12, io base 0x0000dc00
[ 0.946633] usb usb5: configuration #1 chosen from 1 choice
[ 0.946743] hub 5-0:1.0: USB hub found
[ 0.946766] hub 5-0:1.0: 2 ports detected
[ 0.946854] uhci_hcd 0000:00:11.4: PCI INT D -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 0.946869] uhci_hcd 0000:00:11.4: UHCI Host Controller
[ 0.946995] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 6
[ 0.947115] uhci_hcd 0000:00:11.4: irq 12, io base 0x0000e000
[ 0.947372] usb usb6: configuration #1 chosen from 1 choice
[ 0.947483] hub 6-0:1.0: USB hub found
[ 0.947504] hub 6-0:1.0: 2 ports detected
[ 0.947871] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.947876] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.948604] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.949073] mice: PS/2 mouse device common for all mice
[ 0.949737] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.949810] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.950060] device-mapper: uevent: version 1.0.3
[ 0.950248] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
[email protected]
[ 0.950336] device-mapper: multipath: version 1.1.0 loaded
[ 0.950342] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.950668] EISA: Probing bus 0 at eisa.0
[ 0.950693] Cannot allocate resource for EISA slot 4
[ 0.950714] EISA: Detected 0 cards.
[ 0.951098] cpuidle: using governor ladder
[ 0.951522] cpuidle: using governor menu
[ 0.952920] TCP cubic registered
[ 0.952994] NET: Registered protocol family 10
[ 0.953744] lo: Disabled Privacy Extensions
[ 0.954331] NET: Registered protocol family 17
[ 0.954538] Bluetooth: L2CAP ver 2.13
[ 0.954542] Bluetooth: L2CAP socket layer initialized
[ 0.954547] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.954550] Bluetooth: SCO socket layer initialized
[ 0.954614] Bluetooth: RFCOMM TTY layer initialized
[ 0.954619] Bluetooth: RFCOMM socket layer initialized
[ 0.954622] Bluetooth: RFCOMM ver 1.11
[ 0.954653] powernow-k8: Processor cpuid 662 not supported
[ 0.954695] Using IPI No-Shortcut mode
[ 0.955137] PM: Resume from disk failed.
[ 0.955164] registered taskstats version 1
[ 0.955368] Magic number: 1:989:742
[ 0.955603] rtc_cmos 00:04: setting system clock to 2009-11-21 16:43:08 UTC (1258821788)
[ 0.955609] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.955612] EDD information not available.
[ 0.969112] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.084612] ata1.00: ATA-7: ExcelStor Technology J8160, P22OA85A, max UDMA/133
[ 1.084619] ata1.00: 321672960 sectors, multi 16: LBA48
[ 1.090461] ata1.00: configured for UDMA/100
[ 1.090744] scsi 0:0:0:0: Direct-Access ATA ExcelStor Techno P22O PQ: 0 ANSI: 5
[ 1.091434] sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[ 1.091530] sd 0:0:0:0: [sda] Write Protect is off
[ 1.091535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.091581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.091843] sda:
[ 1.092255] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.116230] sda1 sda2 sda3 < sda5 sda6 >
[ 1.147482] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.248040] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 1.249450] ata2.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.15, max UDMA/66
[ 1.249496] ata2.01: ATAPI: SAMSUNG CD-R/RW SW-248F, R601, max UDMA/33
[ 1.249530] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 1.255325] ata2.00: configured for UDMA/33
[ 1.261387] ata2.01: configured for UDMA/33
[ 1.274329] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D 1.15 PQ: 0 ANSI: 5
[ 1.297868] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 1.297874] Uniform CD-ROM driver Revision: 3.20
[ 1.298238] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.298471] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.300109] scsi 1:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-248F R601 PQ: 0 ANSI: 5
[ 1.304104] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.304416] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.304638] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.304681] Freeing unused kernel memory: 516k freed
[ 1.305929] Write protecting the kernel text: 4620k
[ 1.305981] Write protecting the kernel read-only data: 1852k
[ 1.416473] usb 4-1: configuration #1 chosen from 1 choice
[ 1.629733] Floppy drive(s): fd0 is 1.44M
[ 1.652290] FDC 0 is a post-1991 82077
[ 1.691972] Linux agpgart interface v0.103
[ 1.716772] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[ 1.728589] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.744866] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 1.744962] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.788430] usbcore: registered new interface driver hiddev
[ 1.855508] input: USB Advance Mouse as /devices/pci0000:00/0000:00:11.2/usb4/4-1/4-1:1.0/input/input5
[ 1.855718] generic-usb 0003:0518:0005.0001: input,hidraw0: USB HID v1.10 Mouse [USB Advance Mouse] on usb-0000:00:11.2-1/input0
[ 1.895834] input: USB Advance Mouse as /devices/pci0000:00/0000:00:11.2/usb4/4-1/4-1:1.1/input/input6
[ 1.895998] generic-usb 0003:0518:0005.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Advance Mouse] on usb-0000:00:11.2-1/input1
[ 1.898133] usbcore: registered new interface driver usbhid
[ 1.898143] usbhid: v2.6:USB HID core driver
[ 1.898421] 8139too Fast Ethernet driver 0.9.28
[ 1.898514] 8139too 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 12 (level, low) -> IRQ 12
[ 1.900865] eth0: RealTek RTL8139 at 0xc800, 00:e0:4c:c2:71:d6, IRQ 12
[ 3.093377] PM: Starting manual resume from disk
[ 3.093389] PM: Resume from partition 8:5
[ 3.093392] PM: Checking hibernation image.
[ 3.094056] PM: Resume from disk failed.
[ 3.116432] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 3.116443] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.138132] EXT4-fs (sda6): barriers enabled
[ 8.338960] kjournald2 starting: pid 938, dev sda6:8, commit interval 5 seconds
[ 8.339049] EXT4-fs (sda6): delayed allocation enabled
[ 8.339056] EXT4-fs: file extents enabled
[ 8.340358] EXT4-fs: mballoc enabled
[ 8.340388] EXT4-fs (sda6): recovery complete
[ 8.340825] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 8.854365] type=1505 audit(1258821796.398:2): operation="profile_load" pid=961 name=/usr/share/gdm/guest-session/Xsession
[ 8.859134] type=1505 audit(1258821796.403:3): operation="profile_load" pid=962 name=/sbin/dhclient3
[ 8.859593] type=1505 audit(1258821796.403:4): operation="profile_load" pid=962 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 8.859847] type=1505 audit(1258821796.403:5): operation="profile_load" pid=962 name=/usr/lib/connman/scripts/dhclient-script
[ 8.909190] type=1505 audit(1258821796.453:6): operation="profile_load" pid=963 name=/usr/bin/evince
[ 8.918650] type=1505 audit(1258821796.462:7): operation="profile_load" pid=963 name=/usr/bin/evince-previewer
[ 8.924577] type=1505 audit(1258821796.468:8): operation="profile_load" pid=963 name=/usr/bin/evince-thumbnailer
[ 8.990510] type=1505 audit(1258821796.534:9): operation="profile_load" pid=965 name=/usr/lib/cups/backend/cups-pdf
[ 8.991179] type=1505 audit(1258821796.535:10): operation="profile_load" pid=965 name=/usr/sbin/cupsd
[ 9.016428] type=1505 audit(1258821796.560:11): operation="profile_load" pid=966 name=/usr/sbin/tcpdump
[ 9.803327] Adding 1052216k swap on /dev/sda5. Priority:-1 extents:1 across:1052216k
[ 10.318379] udev: starting version 147
[ 10.866063] EXT4-fs (sda6): internal journal on sda6:8
[ 11.256797] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.484533] irda_init()
[ 11.484566] NET: Registered protocol family 23
[ 12.031169] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 1491kHz
[ 12.463787] parport_pc 00:0a: reported by Plug and Play ACPI
[ 12.463863] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 12.608487] ppdev: user-space parallel port driver
[ 12.636990] lp0: using parport0 (interrupt-driven).
[ 12.855917] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 13.100801] flexcop-pci: will use the HW PID filter.
[ 13.100814] flexcop-pci: card revision 1
[ 13.100838] b2c2_flexcop_pci 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 13.104069] DVB: registering new adapter (FlexCop Digital TV device)
[ 13.106354] b2c2-flexcop: MAC address = 00:d0:d7:06:65:9d
[ 13.107451] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[ 13.107458] CX24123: wrong demod revision: 87
[ 13.356121] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.892803] mt352_read_register: readreg error (reg=127, ret==-121)
[ 14.254643] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a, err == -121)
[ 14.254652] Unknown/Unsupported NXT chip: 00 00 00 00 00
[ 14.331683] lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02 error (ret == -121)
[ 14.790208] stv0297_readreg: readreg error (reg == 0x80, ret == -121)
[ 15.159476] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 15.406959] type=1505 audit(1258818202.950:12): operation="profile_replace" pid=1351 name=/usr/share/gdm/guest-session/Xsession
[ 15.418230] b2c2-flexcop: found 'Zarlink VP310 DVB-S' .
[ 15.418242] DVB: registering adapter 0 frontend 0 (Zarlink VP310 DVB-S)...
[ 15.418382] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)' at the 'PCI' bus controlled by a 'FlexCopII' complete
[ 15.426167] EMU10K1_Audigy 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 15.426378] emu1010: Special config.
[ 15.426462] emu1010: EMU_HANA_ID = 0x7f
[ 15.426465] emu1010: filename emu/emu0404.fw testing
[ 15.426472] EMU10K1_Audigy 0000:00:09.0: firmware: requesting emu/emu0404.fw
[ 15.441718] type=1505 audit(1258818202.985:13): operation="profile_replace" pid=1352 name=/sbin/dhclient3
[ 15.449818] type=1505 audit(1258818202.993:14): operation="profile_replace" pid=1352 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 15.451868] type=1505 audit(1258818202.995:15): operation="profile_replace" pid=1352 name=/usr/lib/connman/scripts/dhclient-script
[ 15.471363] type=1505 audit(1258818203.015:16): operation="profile_replace" pid=1355 name=/usr/bin/evince
[ 15.481518] type=1505 audit(1258818203.025:17): operation="profile_replace" pid=1355 name=/usr/bin/evince-previewer
[ 15.489104] type=1505 audit(1258818203.033:18): operation="profile_replace" pid=1355 name=/usr/bin/evince-thumbnailer
[ 15.502755] type=1505 audit(1258818203.046:19): operation="profile_replace" pid=1357 name=/usr/lib/cups/backend/cups-pdf
[ 15.503481] type=1505 audit(1258818203.047:20): operation="profile_replace" pid=1357 name=/usr/sbin/cupsd
[ 15.509786] type=1505 audit(1258818203.053:21): operation="profile_replace" pid=1358 name=/usr/sbin/tcpdump
[ 15.625691] nf_conntrack version 0.5.0 (12287 buckets, 49148 max)
[ 15.628561] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 15.628572] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 15.628576] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 15.730287] firmware size = 0xd67c
[ 25.248039] eth0: no IPv6 routers present
[ 27.540096] emu1010: Loading Hana Firmware file failed, reg = 0x7f
[ 27.546249] EMU10K1_Audigy 0000:00:09.0: PCI INT A disabled
[ 481.438611] Inbound IN=eth0 OUT= MAC=00:e0:4c:c2:71:d6:00:1d:0f:d9:8f:02:08:00 SRC=64.191.54.69 DST=192.168.1.100 LEN=1440 TOS=0x00 PREC=0x00 TTL=52 ID=63414 DF PROTO=TCP SPT=80 DPT=56890 WINDOW=6940 RES=0x00 ACK PSH URGP=0